Visit our Creative Solutions New York showroom.
Please allow 3 to 4 weeks to process the order of this product.
Save $500 off with pre-order!
SmallHD and Teradek have joined forces to create a wireless monitoring device that’s easy to see, easy to power and easy hold. Easily pair the 703 Bolt with Teradek Bolt 500, 1000, or 3000 transmitters.
Equipped with a built-in wireless receiver and cutting edge software tools like real-time 3D LUTs, the 703 Bolt is the ultimate kit for any director (no cage required).
With Teradek wireless technology inside, the 703 Bolt can easily be used as an untethered focusing tool. Its display is tack sharp, and software features like peaking, focus assist, and pixel zoom are easily accessible.
Bring the 703 Bolt to your video village and easily share its built-in wireless feed with another monitor via SDI. Its versatility on set is truly unmatched.
The 17" monitor that rivals OLED with Incredible color accuracy and daylight viewability.
| Model: MON-1703-P3X
Input: 2x SDI, HDMI
Output: 2x SDI, HDMI
Display: 17-inch, 1920x1080, 900nits
OMOD XLR2 is our second generation of the OMOD XLR module for your RED DSMC2 camera that adds professional in-camera audio features including push-to-operate controls, high pass filters, peak warning indicators, per channel line / mic level control and per channel Phantom power (+48v). AES or analog audio input.
This new version features headphone confidence monitoring from the camera's brain - so you hear what the camera is recording and you also can listen to audio on playback from the camera. Other improvements include an adjustment to the limiter allowing operators to ride the levels higher in addition to new, improved knurled knobs. Units ship with our MOD GUARD attached for added protection when your module is not attached to your camera.
Upgrade options will be offered to existing customers who purchased the first gen OMOD XLR.
• Full size, balanced XLR inputs
• AES or Analog audio input
• +48V Phantom Power (per channel)
• Line / Mic level selection (per channel)
• 3.5mm Headphone Monitoring of DSMC2
camera for confidence and audio on playback
• 3-pin Aux Power + Run/Stop Trigger
• 5-pin Timecode Input
• CRTL input for RT Motion MDR-M or MDR-SK
• SDI out + HDMI out
• DC/AC power input (DSMC/DSMC2 6-pin)
• Compatible with all RED approved DSMC2 battery modules and all DSMC2 cameras
Weight 1.3 lbs
Length (from back of camera) 51.5mm / 2in
Audio Signal Specifications:
MAX GAIN MIC 65dB - LINE 35dB
MAX INPUT MIC 0dBu - LINE +20dBu
INPUT IMPEDANCE MIC > 2K LINE >10K
MIC POWER +48V PHANTOM.
FREQUENCY RESPONSE +0; -1.5dB 20Hz to 20kHz
HI PASS FILTER -3dB @ 90Hz 6dB OCTAVE
HARMONIC DISTORTION <0.03% @ 1kHz 0dB - <0.15% @ 40-20kHz +15dBm
CROSSTALK <70dB 40Hz to15kHz
MAX OUTPUT LEVEL +18dBm / +14dBm MONITOR
OUTPUT IMPEDANCE <20R MONITOR PATHS
NOISE <-125dB EIN; MIC 20Hz-20kHz; 200R SOURCE/ < 80dB SNR; LINE 20Hz -20kHz
LIMITER THRESHOLD +8dB
PageBuilder OS: Quick and easy way to access professional software tools like Focus Peaking, HD Waveform, and 3D LUTs.
UltraBright monitors feature HDR Preview with 10-Bit ColorEngine and up to 2500 nits. Fine tune your HDR Preview with white point and black point adjustment sliders. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine.
The 503 and 703 UltraBright are the Brightest 5" and 7" monitors in the world while maintaining low power consumption. In addition to LEMO power, Gold Mount, V-Mount and Sony L-Series battery plates are available.
Pagebuilder OS enables you to send your video signal downstream via the Output Preview page. Any LUTs applied to the Output Preview page will also be mirrored downstream. Easily convert HDMI/SDI signals with Cross Conversion .
Display up to three, fully customizable Scopes on screen at a time. Utilize Color Picker to show raw pixel values from the displayed video.
Exposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Monitor two input sources simultaneously. You can apply LUT’s and tools to each source individually. Great for monitoring A/B cameras or pre and post LUT footage. You can also apply tools to each page individually.
Focus assist creates a bright highlight on in-focus subject matter; highly recommended when focusing on the fly. Focus Peaking increases the image sharpness allowing more detailed focusing. Change your color and intensity of your focus tools.
Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable).
The Brightest 5-inch monitor available with HDR Preview, Waveform, 3D LUT support and 12v Lemo power
Input: 2-SDI, HDMI
Output: SDI, HDMI
Display: 5-inch, 1920x1080, 2200nits, Gorilla Glass
Power Consumption: 11 watts
Weight: 15 oz